The RAM-B-166-TAB12U is a full kit that will allow you to mount an iPad Mini 1, 2 or 3 onto a suction-compatible surface.
The RAM-B-166-TAB12U consists of the following RAM (B Size) components:
- 1 x RAM Tab-Tite™ Universal Spring Loaded Cradle for the iPad Mini 1-3 WITH CASE, SKIN OR SLEEVE (RAM-HOL-TAB12U)
- 1 x RAM Diamond Base with 1" Ball (RAM-B-238U)
- 1 x Double Clamp Arm (Length of your choice - See below)
- 1 x RAM 3.3" Diameter Suction Cup Base with 1" Ball (RAM-B-224-1U)
RAM Tab-Tite™ Universal Spring Loaded Cradle for the iPad Mini 1-3 WITH CASE, SKIN OR SLEEVE (RAM-HOL-TAB12U)
The RAM-HOL-TAB12U consists of a spring loaded back plate and custom support cups for the iPad mini WITH skin, sleeve or case.
The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go.
Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended.
Perfect for stationary or on the go applications, the RAM-HOL-TAB12U is just what you need to get the most out of your tablet.
Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.
The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
- Height: 7.125" to 9.5"
- Width: 5.06" to 5.68"
- Depth: 0.13" to 1"
May not be suitable for some tablet models or devices - please check dimensions first.
RAM Double Socket Clamp Arm (Select length prior to checkout);
- SHORT (RAM-B-201U-A) Overall Length: 6cm Socket-To-Socket Length: 4.5cm
- STANDARD (RAM-B-201U) Overall Length: 9cm Socket-To-Socket Length: 7.6cm
- LONG (RAM-B-201U-C) Overall Length: 15cm Socket-To-Socket Length: 13.5cm
RAM 3.3" Diameter Suction Cup Base with 1" Ball (RAM-B-224-1U)
The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the RAM-B-238U (diamond base with 1" rubber ball).
The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for the best result, mount the suction cup on a glass or non-porous plastic surface.
** This listing includes one double socket clamp arm only. Please select the length required prior to checkout.
* Device shown for illustration purposes only and is not included in purchase.